Began fitting the baggage bulkhead correlated covers. The top portion has to have a 8.5 inch radius centered at a certain point that has to be cut off to fit. The rub blocks for the seatbelt anchor and the little hole in which the cable passes through was pretty simple. I used a 3/8” unibit and my bandsaw for the hole/slot. I drilled the holes from the cover into the bulkhead. These holes were also drilled for nut plates. Everything cleaned up and deburred. I wasn't able to get to the nut plate installation as I needed to go to bed for work, gotta pay for this all somehow :)
Oh and also purchased some black (5/32) clecoes to make this whole process easier.